 |
Jameda Products List |
|
 |
TLR-D5 Intelligent Fan Coil controller, Base & Terminal
Features
Temperature control for 2 and 4-pipe fan coil systems.
Relays switching for each up to 10(6)A
Large temperature range from –20°C to 70°C (-4°F to 158°F).
Automatic fan control for three stage fans.
Control for heating, cooling and fan only operation
[more] |
 |
J511 Pressure Transducer
Service: Liquid, gas or vapor.
Sensor Materials: Thick ceramic film
Body: 1Cr18Ni9Ti
Accuracy: 1.0% (Combined Non-linearity, Hysteresis and Repeatability)
Insulation: ≥10MΩ﹫50V
Pressure Limits: 1.5×FS
Vibration/shock: 10g/5…2000HzX/Y/ZAxis/20g 11ms
Electromagnet
[more] |
 |
Series J400 Low Differential Pressure Transmitter
Features
/cn/WebEditor/UploadFile/2009522165157635.swf
◆0.25 accuracy
◆For application in HVAC
◆Range from 0 – 1inH O through 0 – 30 Psid
◆4-20mA Output
◆LED working indicator
◆Superior Long term Stability
◆Compact, lightweight design
◆High Performance and Low Cos
[more] |
 |
JⅡ Inclined-vertical Tube Manometer
◆Inclined-vertical shaped tube with low-volatile indicating red fluid.
◆Capable of measuring higher ranges with fine details at lower ranges
◆Capable of measuring positive, negative, and differential
Pressure of air or gas
◆Comes with 2 mounting screws, 2 tubing connectors,
8
[more] |
 |
TLC-BCR-T Intelligent binary temperature controller
Features
Low power energy consumption: < 1W per unit
Relays switching for outputs each up to 300W
Temperature control for 2 or 4-pipe heating or cooling systems.
Large temperature range from –40°C to 70°C (-40°F to 158°F).
Choose between one 3-poin
[more] |
 |
TLC-BCR Intelligent binary temperature controller
Features
Low power energy consumption: < 1W per unit
Relays switching for outputs each up to 300W
Temperature control for 2 or 4-pipe temperature control systems.
Large temperature range from –40°C to 70°C (-40°F to 158°F).
Choose between one 3-point
[more] |
 |
TLC-FCR-2 Intelligent Fan Coil controller
Features
Low power energy consumption: < 1W per unit
Relays switching for outputs each up to 300W
Temperature control for 2 or 4-pipe fan coil systems.
Large temperature range from –40°C to 70°C (-40°F to 158°F).
Applications
[more] |
 |
TLC-FCR-T Intelligent Fan Coil Controller
Features
Low power energy consumption: < 1W per unit
Relays switching for outputs each up to 300W
Temperature control for 2-pipe fan coil systems.
Large temperature range from –40°C to 70°C (-40°F to 158°F).
Applications
&n
[more] |
 |
TLC-FCR Intelligent Fan Coil controller
Features
Low power energy consumption: < 1W per unit
Relays switching for outputs each up to 300W
Temperature control for 2-pipe fan coil systems.
Large temperature range from –40°C to 70°C (-40°F to 158°F).
Automatic fan control for three stage fans.
[more] |
 |
HUBA501 Relatibe and Absolute Pressure transmitter
The pressure transmitter of type series 501 with proven ceramic technology, features adjusted and anplified sensor signals which are available as standardised current outputs.
/cn/WebEditor/UploadFile/2009531153055729.swf
[more] |
 |
HUBA501 Relatibe and Absolute Pressure transmitter
The pressure transmitter of type series 501 with proven ceramic technology, features adjusted and anplified sensor signals which are available as standardised current outputs.
/cn/WebEditor/UploadFile/2009531153055729.swf
[more] |
 |
692 Differential pressure transmitter
The differential pressure transmitter of type series 692 with proven, unique ceramic technology, features adjusted and amplified sensor signals which are available as standardised voltage or current outputs.
/cn/WebEditor/UploadFile/2009531153656720.swf
[more] |
 |
604 Relativ and differential pressure switch
The type 604 pressure switch is used as a p flow switch in ventilation ducts for the control of filters and fans, and in primary and secondary control systems for the control of air dampers.
/cn/WebEditor/UploadFile/200953115453203.swf
[more] |
 |
604 Relativ and differential pressure switch
The type 604 pressure switch is used as a p flow switch in ventilation ducts for the control of filters and fans, and in primary and secondary control systems for the control of air dampers.
/cn/WebEditor/UploadFile/200953115453203.swf
[more] |
 |
506 Relative pressure transmitter
The pressure transmitter type 506 with proven ceramic technology, features adjusted and amplified sensor signals which are available as standardised current outputs.
/cn/WebEditor/UploadFile/2009531154940717.swf
[more] |
 |
511 Electronic pressure switch
These compact OEM pressure switchs type series 511meet the high- est specification for mechanical stress, EMC compatibility, and operational reliability, which means that this range is particulary suitable for all demanding industrial applications.
/cn/WebEdi
[more] |
 |
511 Electronic pressure switch
These compact OEM pressure switchs type series 511meet the high- est specification for mechanical stress, EMC compatibility, and operational reliability, which means that this range is particulary suitable for all demanding industrial applications.
/cn/WebEdi
[more] |
 |
511 Electronic pressure switch
These compact OEM pressure switchs type series 511meet the high- est specification for mechanical stress, EMC compatibility, and operational reliability, which means that this range is particulary suitable for all demanding industrial applications.
/cn/WebEdi
[more] |
 |
511 Electronic pressure switch
These compact OEM pressure switchs type series 511meet the high- est specification for mechanical stress, EMC compatibility, and operational reliability, which means that this range is particulary suitable for all demanding industrial applications.
/cn/WebEdi
[more] |
 |
511 Electronic pressure switch
These compact OEM pressure switchs type series 511meet the high- est specification for mechanical stress, EMC compatibility, and operational reliability, which means that this range is particulary suitable for all demanding industrial applications.
/cn/WebEdi
[more] |
 |
511 Electronic pressure switch
These compact OEM pressure switchs type series 511meet the high- est specification for mechanical stress, EMC compatibility, and operational reliability, which means that this range is particulary suitable for all demanding industrial applications.
/cn/WebEdi
[more] |
 |
511 Electronic pressure switch
These compact OEM pressure switchs type series 511meet the high- est specification for mechanical stress, EMC compatibility, and operational reliability, which means that this range is particulary suitable for all demanding industrial applications.
/cn/WebEdi
[more] |
 |
J3051 Smart Pressure Transmitter
Supply Voltage: 9~45VDC
Output: 4~20mADC (all models) + RS232 (select models only)
Loop Resistance: RL=( Us–9V)/0.023A
RL= Max. Resistance Us = Power Voltage
NOTE: H.A.R.T. can only co
[more] |
 |
SDA-T1Duct Temperature Transmitter
Features
Temperature measurement for air ducts
Minimum and maximum value memory
0…10V, 0…20mA or 2…10V, 4…20mA measuring signals selectable with jumpers
Optional alternative signal ranges programmable
Selectable averaging signal
Optional external display device (OPA-S)
[more] |
 |
SRA-H1Intelligent Indoor Humidity Transmitter
Features
Indoor humidity measurement
Minimum and maximum value memory
0…10V, 0…20mA or 2…10V, 4…20mA measuring signals, selectable with jumpers
Optional alternative signal ranges programmable
Selectable averaging signal
Optional external display device (OPA-S)
&n
[more] |
 |
SOA-H1Outdoor Humidity Transmitter
Features
· Outdoor humidity measurement
· Minimum and maximum value memory
· 0…10V, 0…20mA or 2…10V, 4…20mA measuring signals, selectable with jumpers
· Optional alternative signal ranges programmable
· Sel
[more] |
 |
SOA-H1Outdoor Humidity Transmitter
Features
· Outdoor humidity measurement
· Minimum and maximum value memory
· 0…10V, 0…20mA or 2…10V, 4…20mA measuring signals, selectable with jumpers
· Optional alternative signal ranges programmable
· Sel
[more] |
 |
OPA-S1Operation and Display for intelligent transmitters
Features
Display of sensor values and adjustment according to real values not signals
Display and reset of minimum and maximum values
Password protected programmable configuration parameters
Available in various designs and materials.
&n
[more] |
 |
OPA-S1Operation and Display for intelligent transmitters
Features
Display of sensor values and adjustment according to real values not signals
Display and reset of minimum and maximum values
Password protected programmable configuration parameters
Available in various designs and materials.
&n
[more] |
 |
J300 Low Differential Pressure Transmitter
◆Silicon Sensor
◆For application in HVAC
◆Range from 0 – 1inH O through 0 – 30 Psid
◆4-20mA Output
◆LED Display with Clear Reading
◆High Performance and Low Cost
/cn/WebEditor/UploadFile/2009531131150675.swf
[more] |
 |
J2000 Differential Pressure Gauges
Features
◆Magnet-helix indicating mechanism ideal for low DP measurement
◆A wide choice of 81 models available to select
◆Inertia-free, drift-free pointer indication
◆High resistance to shock and vibration
◆Economic way to measure low differential pressure
◆Identical to Dwyer’s 2000
[more] |
 |
VZ6 Series Zone Valves
General Description
This zone valves are intended for the use in air conditioning zoning systems. They control heating and cooling coils in combination with an on/off thermostat or a b
[more] |
 |
VZ5 Series Zone Valves
General Description
This zone valves are intended for the use in air conditioning zoning systems. They control heating and cooling coils in combination with a two-position thermostat or a building automation system. The valves are available in 2-way and 3-way versions. The act
[more] |
 |
VZ4 Series Zone Valves
This zone valves are intended for the use in air conditioning zoning systems.
They control heating and cooling coils in combination with a two-position thermostat or a building automation system. The valves are available in 2-way and 3-way spring return normally closed versions. The actuator
[more] |
 |
AMI Bulb well (immersion pocket) for temperature sensors
General Description
AMI bulb wells or immersion pockets are used with S-T, SD-T, SDA-T or SDB-T Series temperature sensors and transmitters to measure the temperature of liquids. The wells are installed in a standard ½” NPT thread
[more] |
 |
J600 Differential Pressure Switches
Applications
600 series Pressure switches is designed to monitor air or neutral gases, either positive, negative (vacuum) or differential pressures. It is widely used in the ventilation ducts for the control of filters and fans as well as the other air flow status detecting
[more] |
 |
SRA-H1T1Indoor Humidity & Temperature Transmitter
Features
Indoor humidity and temperature measurement
Minimum and maximum value memory
0…10V, 0…20mA or 2…10V, 4…20mA measuring signals, selectable with jumpers
Optional alternative signal ranges programmable
Selectable averaging signal
Optional external disp
[more] |
 |
SOA-H1TDuct Humidity Transmitter with Temperature Sensor
Features
· Humidity and temperature measurement for air ducts
· Minimum and maximum humidity memory
· 0…10V, 0…20mA or 2…10V, 4…20mA measuring signals selectable with jumpers
· Optional alternative signal ranges programmable
· Selectable averaging signal
· Option
[more] |
 |
SRA-H1TIndoor Humidity Transmitter with Temperature Sensor
Features
Indoor humidity and temperature measurement
Minimum and maximum value memory
0…10V, 0…20mA or 2…10V, 4…20mA measuring signals, selectable with jumpers
Optional alternative signal ranges programmable
Selectable averaging signal
Optional
[more] |
 |
SRA-H1TIndoor Humidity Transmitter with Temperature Sensor
Features
Indoor humidity and temperature measurement
Minimum and maximum value memory
0…10V, 0…20mA or 2…10V, 4…20mA measuring signals, selectable with jumpers
Optional alternative signal ranges programmable
Selectable averaging signal
Optional
[more] |
 |
SRA-H1TIndoor Humidity Transmitter with Temperature Sensor
Features
Indoor humidity and temperature measurement
Minimum and maximum value memory
0…10V, 0…20mA or 2…10V, 4…20mA measuring signals, selectable with jumpers
Optional alternative signal ranges programmable
Selectable averaging signal
Optional
[more] |
 |
SDA-H1TDuct Humidity Transmitter with Temperature Sensor
Features
Humidity and temperature measurement for air ducts
Minimum and maximum humidity memory
0…10V, 0…20mA or 2…10V, 4…20mA measuring signals selectable with jumpers
Optional alternative signal ranges programmable
Selectable averaging signal
[more] |
 |
SDA-H1TDuct Humidity Transmitter with Temperature Sensor
Features
Humidity and temperature measurement for air ducts
Minimum and maximum humidity memory
0…10V, 0…20mA or 2…10V, 4…20mA measuring signals selectable with jumpers
Optional alternative signal ranges programmable
Selectable averaging signal
[more] |
 |
S-T, Flying Lead Temperature Sensor
Features
Thermistors and PT sensing elements to fit your system
Simple installation
Wide range of temperature probes
Including 2m (6.5ft) wire
Applications
Measure temperature for heating, ventilation and air conditionin
[more] |
 |
SOA-T1Outdoor Temperature Transmitter
Features
Outdoor temperature measurement
Minimum and maximum value memory
0…10V, 0…20mA or 2…10V, 4…20mA measuring signals, selectable with jumpers
Optional alternative signal ranges programmable
Selectable averaging signal
Optional external display device (OPA-S)
[more] |
 |
SDA-H1Intelligent Duct Humidity Transmitter
Features
Humidity measurement for air ducts
Programmable humidity range
Minimum and maximum humidity memory
0…10V, 0…20mA or 2…10V, 4…20mA measuring signals selectable with jumpers
Selectable averaging signal
Optional external display device (OPA-S)
&
[more] |
 |
TLR-D41 Series Intelligent PID fan coil controller for modulating actuatorsbase & terminal
Features
Temperature control for 2-pipe fan coil systems.
Relays switching for each up to 10(6)A
Large temperature range from –20°C to 70°C (-4°F to 158°F).
One analog output for 0-10V or 2-10V actuators
One a
[more] |
 |
TEFPI Controller and Thermostat
Features
Controller: Floating point temperature controller and positioner
On/Off thermostat for 4-pipe systems or 2-pipe systems with fan function.
Temperature control depending on room or return air temperature
Integrated room temperature sensor
Programmable use
[more] |
 |
TEMPI Controller, Positioner and Thermostat
Features
Multi Function controller: Temperature controller, positioner, analog PI controller or P-PI-cascade controller. In one unit.
2 Control loops in one, Modulating PI-control analog loop and PI-control temperature loop.
Output for a DC 0...10V actuator
Input for a DC 0…10V senso
[more] |
 |
TCY3-T0121R Series Intelligent Compact Controller
Features
Temperature control for 2-pipe, 4-pipe HVAC systems.
-H version: Humidity control with integrated humidity sensor
Universal PID and binary control for any analog input/output signal and range
4 independent PID sequences, 6 independent binary sequences
1 modulat
[more] |
 |
TCY3-T0121T Series Intelligent Compact Controller
Features
Temperature control for 2-pipe, 4-pipe HVAC systems.
-H version: Humidity control with integrated humidity sensor
Universal PID and binary control for any analog input/output signal and range
4 independent PID sequences, 6 independent binary se
[more] |
 |
TCY3-T1102 Series Intelligent Compact Controller
Features
Temperature control for 2-pipe, 4-pipe HVAC systems.
-H version: Humidity control with integrated humidity sensor
Universal PID and binary control for any analog input/output signal and range
4 independent PID sequences
2 modulating out
[more] |
 |
TCY3-T1102 Series Intelligent Compact Controller
Features
Temperature control for 2-pipe, 4-pipe HVAC systems.
-H version: Humidity control with integrated humidity sensor
Universal PID and binary control for any analog input/output signal and range
4 independent PID sequences
2 modulating out
[more] |
 |
SRA-T1Indoor Temperature Transmitter
Features
Indoor temperature measurement
Minimum and maximum value memory
0…10V, 0…20mA or 2…10V, 4…20mA measuring signals, selectable with jumpers
Optional alternative signal ranges programmable
Selectable averaging signal
Optional external display device (OPA-S)
&n
[more] |
 |
TCY-M Series Intelligent Temperature Controller
Features
Temperature PID control for HVAC systems.
1 modulating output for DC 0...10V or 0…20 mA actuators with 10 bit resolution.
1 internal temperature sensor and 1 external sensor input
Multiple remote control functions on external input
Passw
[more] |
 |
SRA-TIndoor Temperature Sensor
Features
Thermistor, NI and PT sensing elements to fit your system
Simple and secure installation
Wide range of temperature probes
Applications
Indoor temperature measurement
/cn/WebEditor/UploadFile/200
[more] |
 |
SDB-TDuct Temperature Sensor
Features
Thermistor, PT and NI sensing elements to fit your system
Simple and secure installation
Wide range of temperature probes
Compact size and modern design
Applications
On return air ducts to measure room temperatures
On supply air duct
[more] |
 |
SD-T, Duct Temperature Sensor
Features
Thermistors and PT sensing elements to fit your system
Simple and secure installation
Wide range of temperature probes
Applications
On return air ducts to measure room temperatures
On supply air ducts to measure heati
[more] |
 |
SOA-TOutdoor Temperature Sensor
Features
Outdoor temperature measurement
Thermistor, NI and PT sensing elements to fit your system
Simple and secure installation
Wide range of temperature probes
Applications
Outside air temperature measurements for summer winter compensation, energy optimization and e
[more] |
|
|
| Tel:+86.010.84652840/2846/2037/2837 Fax:+86.010.84652840-8011 |
| Copyright 2002-2009 www.jameda.com All rights reserved. |
| Address:4E 3rd Building, YangMing Square, 10 XiaoYing Rd, ChaoYang District, Beijing
Post Code:100101 |
| |
|
|
